How does it work?įirst of all, a good network diagram will always make it easier for others to understand what you are trying to say. Neither router can operate inīridge mode, and configurations on both modems don't have PPPoE Which is the IP address of the modem but both have PPPoE clients configured with

From the existing configuration, both Ether 1 on the MikrotiksĬonnect to the ISPs using address acquisition of static instead of PPPoE.

How do i route traffic from VLAN 102 in Mikrotik 1 toĮther 3 (Mikrotik 1) and down to Ether 3 in Mikrotik 2 to the ISP which.

I need Ether 9 (VoIP server 192.168.121.2) in Mikrotik 1 to route to.

VLAN 103 in Mikrotik 2 can't connect/route to VoIP server.

VLAN 104 = IP address 192.168.111.0/24 is used for local network and.

VLAN 103 = IP address 192.168.112.0/24 is used for the VoIP network.

Ether 4 (192.168.110.0/24) is connected to a switch for use in this.

Ether 1 is out to another ISP for the Internet.

Ether 9 is the port to which the VoIP server (192.168.121.2) is connected, and Ether 9 has an IP address of 192.168.121.1/24.Ether 6 (192.168.60.1) goes to the 6th floor which is only used for the Internet, which is connected to Ether 1.Switches which are used for IP phones on VLAN 103 (192.168.114.0/24) and Ether 4 is a master of Ether 5, and both ports connect to 2 different.

Ether 3 is connected to Mikrotik 2 and has an IP address of 192.168.30.1.

There's a VOIP server on IP address 192.168.121.2 on Mikrotik 1.Both Mikrotiks connected to each other on port 3.Each ether 1 port connected to ISP through PPPoE.There are 2 Mikrotiks, each are on different floor.

Mikrotik vlan firewall